USB-CN226

USB interface Omron PLC programming cable USB / peripheral port 3 meters, with communication indicator, support WIN7, direct connection OMRON CS / CJ, CQM1H and CPM 2C series PLC's peripheral port without CS1W-CN114 adapter.

Features
Support CX-Programmer V1.0and above.
Support Windows 7/2000/Windows XP (WinNT4/95/98/Me/DOS NOT SUPPORTED).
Smart LED indicator. Auto identification of optical isolation status.
baud rate: 300 bps ~ 1Mbps automatically adaptive.  
USB bus-powered, with current consumption of 50 mA
Each PC Support multiple cables
Support UART data format: Data bit: 7, 8; stop bit: 1, 2; Parity: odd / even / no parity
Compatible with USB V1.1 and V2.0
Usage:
USB device drivers should be installed before using programming cable, which are available on the CD-ROM sold together with the cable. And for the specific installation steps, please refer to the instruction files on the CD-ROM drivers, and details are not necessarily listed here.
After completing Driver installation, the corresponding COM port for the programming cable will be displayed in the Device Manager of Window. The step next is just to choose this COM port in the programming software and other application software and keep other communication parameters as in the Default settings. And the following steps are exactly the same as in the traditional programming cables with RS232 interfaces.

Package info 
1 x USB-CN226 PLC Programming Cable 
1 x USB-CN226 Drive