LOGO PLC Cable

Specifications

Siemens LOGO! programming plc cable, USB version.
Support Windows2000/Windows XP (WinNT4/95/98/Me/DOS NOT SUPPORTED).

LOGO! USB-CABLE is a programming cable which use the USB interface to achieve the serial connection and the conversion of peripheral port signal. Cable programming is provided through the USB interface connecter and serial perigherals signal converter programming, under the control of computer operation, simulating the computers USB interface to traditional serial(commonly known as COM port), thus using the current programming software, communicating software and monitoring software. The work power of the cable comes from USB port and programming port of LOGO controller.
USB-CABLE is photoelectric isolated, can be applied to LOGO Controller, especially the industrial fields with greater interferrence and easily damaged communication port. All kinds of protection measures in the circuit give promission to the safe operation of the system.

Characteristics and Specifications

* Support USB-CABLE operationg system windows2000, windows XP, do not support WinNT4/95/98/Me/DOS.
* Support USB-CABLE programming software version LOGO! Soft V4.0 and above.
* Fully compatible with standard USB V2.0.
* Power supplied by USB bus and the programming port of LOGO! Controller.
* Optical isolation voltage 1000VDC.
* Support UART data format Data78, stop bit12, check odd/even/no parity.
* Each PC only supports one USB cable.
* Working temperature -20 0C~75 0C.
* Cable Length 2.5meters, color black.