Categories

Home > PLC>Omron>Omron CJ1W-MD233
Omron CJ1W-MD233 Maximize

Omron CJ1W-MD233

Call For Price
01783 007 004

More details

No reward points for this product.


24 other products in the same category:

Omron CJ1W-MD233

 

International Standards

 

 

  • The standards are abbreviated as follows: U: UL, U1: UL (Class I Division 2 Products for Hazardous Locations), C: CSA, UC: cULus, UC1: cULus (Class I Division 2 Products for Hazardous Locations), CU: cUL, N: NK, L: Lloyd, and CE: EC Directives.
  • Contact your OMRON representative for further details and applicable conditions for these standards.

 

 

Input Units

 

 

Unit 
type		Product
name		SpecificationsCurrent 
consump- 
tion (A)		ModelStand- 
ards
I/O 
points		Input 
voltage 
and 
current		CommonsExternal 
con- 
nection		No. of 
words 
allo- 
cated		5 V24 V
CJ1 
Basic
I/O 
Units		DC 
Input 
Units
2054_lu_1_1
8 inputs12 to 
24 VDC, 
10 mA		Independent
contacts		Removable 
terminal 
block		1 word0.09---CJ1W-ID201UC1, 
N, L, 
CE
16 inputs24 VDC, 
7 mA		16 points, 
1 common		Removable 
terminal 
block		1 word0.08---CJ1W-ID211
16 inputs
(High 
speed)		24 VDC, 
7 mA		16 points, 
1 common		Removable 
terminal 
block		1 word0.13---CJ1W-ID212N, L, 
CE
32 inputs24 VDC, 
4.1 mA		16 points, 
1 common		Fujitsu 
connector		2 words0.09---CJ1W-ID231UC1, 
N, L, 
CE
32 inputs24 VDC, 
4.1 mA		16 points, 
1 common		MIL 
connector		2 words0.09---CJ1W-ID232
32 inputs
(High 
speed)		24 VDC, 
4.1 mA		16 points, 
1 common		MIL 
connector		2 words0.20---CJ1W-ID233N, L, 
CE
64 inputs24 VDC, 
4.1 mA		16 points, 
1 common		Fujitsu 
connector		4 words0.09---CJ1W-ID261UC1, 
N, L, 
CE
64 inputs24 VDC, 
4.1 mA		16 points, 
1 common		MIL 
connector		4 words0.09---CJ1W-ID262
AC 
Input 
Units
2054_lu_1_2
8 inputs200 to 24 
VAC, 10 mA
(200 V, 
50 Hz)		8 points, 
1 common		Removable 
terminal 
block		1 words0.08---CJ1W-IA201
16 inputs100 to 120 
VAC, 7 mA 
(100 V, 
50 Hz)		16 points, 
1 common		Removable 
terminal 
block		1 words0.09---CJ1W-IA111

 

 

Accessories

 

Connectors are not included for models with connectors. Either use one of the applicable connector listed below or use an applicable Connector-Terminal Block Conversion Unit or I/O Relay Terminal. For details on wiring methods, refer to Data Sheet.

 

Applicable Connectors

 

Fujitsu Connectors for 32-input, 32-output, 64-input, 64-output, 32-input/32-output, and 16-input/16-output Units

 

 

NameCon- 
nection		RemarksApplicable UnitsModelStand- 
ards
40-pin 
Con- 
nectors		SolderedFCN-361J040-AUConnectorFujitsu Connectors: 
CJ1W-ID231(32 inputs): 1 per Unit 
CJ1W-ID261 (64 inputs): 2 per Unit 
CJ1W-OD231 (32 outputs):1 per Unit 
CJ1W-OD261 (64 outputs): 2 per Unit 
CJ1W-MD261 (32 inputs, 32 outputs): 
2 per Unit		C500-CE404---
FCN-360C040-J2Connector 
Cover
CrimpedFCN-363J040HousingC500-CE405
FCN-363J-AUContactor
FCN-360C040-J2Connector 
Cover
Pressure 
welded		FCN-367J040-AU/FC500-CE403
24-pin 
Con- 
nectors		SolderedFCN-361J024-AUConnectorFujitsu Connectors: 
CJ1W-MD231 (16 inputs, 16 outputs): 
2 per Unit		C500-CE241
FCN-360C024-J2Connector 
Cover
CrimpedFCN-363J024SocketC500-CE242
FCN-363J-AUContactor
FCN-360C024-J2Connector 
Cover
Pressure 
welded		FCN-367J024-AU/FC500-CE243

 

 

MIL Connectors for 32-input, 32-output, 64-input, 64-output, 32-input/32-output, and 16-input/16-output Units

 

 

NameCon- 
nection		RemarksApplicable UnitsModelStand- 
ards
40-pin 
Con- 
nectors		Pressure 
welded		FRC5-AO40-3TOSMIL Connectors: 
CJ1W-ID232/233 (32 inputs): 1 per Unit 
CJ1W-OD232/233/234 (32 outputs):1 per Unit 
CJ1W-ID262 (64 inputs): 2 per Unit 
CJ1W-OD262/263 (64 outputs): 2 per Unit 
CJ1W-MD263/563 (32 inputs, 32 outputs): 
2 per Unit		XG4M-4030-T---
Crimped-XG5N-401 *
20-pin 
Con- 
nectors		Pressure 
welded		FRC5-AO20-3TOSMIL Connectors: 
CJ1W-MD232/233 (16 inputs, 16 outputs): 
2 per Unit		XG4M-2030-T---
Crimped-XG5N-201 *

 

 

* Crimp Contacts are also required. Refer to Data Sheet for details.

 

Applicable Connector-Terminal Block Conversion Units

 

Size and Mounting are Refer to Data Sheet.

 

 

Type/ 
Series		Num- 
ber 
of 
poles		Wiring 
method		Ter- 
minal 
type		Common 
terminals		I/O UnitsModel *Stand- 
ards
Bleeder 
resistance
Indicators
PLCs/ 
XW2R		34Phillips 
screw 
2054_lu_4_1		M3NoCJ1W-ID231 
CJ1W-ID261		XW2R-J34GD-C1---
CJ1W-ID232 
CJ1W-ID233 
CJ1W-ID262		XW2R-J34GD-C2
Slotted 
screw 
(rise up) 
2054_lu_4_2		M3 
(Euro- 
pean 
type)		CJ1W-ID231 
CJ1W-ID261		XW2R-E34GD-C1
CJ1W-ID232 
CJ1W-ID233 
CJ1W-ID262		XW2R-E34GD-C2
Push-in 
spring 
2054_lu_4_3		ClampCJ1W-ID231 
CJ1W-ID261		XW2R-P34GD-C1
CJ1W-ID232 
CJ1W-ID233 
CJ1W-ID262		XW2R-P34GD-C2

 

 

 

Note: For the combination of Input Units with Connector-Terminal Block Conversion Units, refer to 2. Connecting 
          Connector-Terminal Block Conversion Units. 
* Representative models only. For details, refer to the XW2R series catalog (Cat. No. G077).

 

 

Connecting Cables for Connector-Terminal Block Conversion Units

 

 

AppearanceConnectorsCable lenght [m]Model
XW2Z-[][][]PF 
2054_lu_5_1		One 40-pin Fujitsu Connector to 
One 40-pin MIL Connector		0.5XW2Z-050PF
1XW2Z-100PF
1.5XW2Z-150PF
2XW2Z-200PF
3XW2Z-300PF
5XW2Z-500PF
XW2Z-[][][]PM 
2054_lu_5_2		One 40-pin MIL Connector to 
One 40-pin MIL Connector		0.5XW2Z-050PM
1XW2Z-100PM
1.5XW2Z-150PM
2XW2Z-200PM
3XW2Z-300PM
5XW2Z-500PM

 

 

Applicable I/O Relay Terminals

 

Size (horizontal mounting) and Mounting are Refer to Data Sheet.

 

 

Type/ 
Series		SpecificationsModelStand- 
ards
ClassificationPo- 
lar- 
ity		Number 
of 
points		Rated 
ON cur- 
rent at 
contacts		Rated 
voltage
Push-In 
Plus 
terminal 
block/ 
G70V		In- 
puts		DC 
inputs		NPN16 
(SPST- 
NO × 16)		50 mA24 VDCG70V-SID16P *4UC, 
CE 
(TÜV 
certi- 
fied)
PNPG70V-SID16P-1 *4
NPNG70V-SID16P-C16 *5
PNPG70V-SID16P-1-C16 *5
Out- 
puts		Relay 
outputs		NPN16 
(SPDT 
× 16)		6 A/ 
point, 
10 A/ 
common		G70V-SOC16P *4
PNPG70V-SOC16P-1 *4
NPNG70V-SOC16P-C4 *6
PNPG70V-SOC16P-1-C4 *6
Standard/ 
G7TC		In- 
puts		AC 
inputs		NPN16 
(SPST- 
NO × 16)		1A100/(110) 
VAC		G7TC-IA16 AC100/110U, C
200/(220) 
VAC		G7TC-IA16 AC200/220
DC 
inputs		12 VDCG7TC-ID16 DC12
24 VDCG7TC-ID16 DC24
100/110 
VDC		G7TC-ID16 DC100/110
Out- 
puts		Relay 
outputs		NPN8 
(SPST- 
NO × 8)		5A12 VDCG7TC-OC08 DC12
24 VDCG7TC-OC08 DC24
16 
(SPST- 
NO × 16)		12 VDCG7TC-OC16 DC12
24 VDCG7TC-OC16 DC24
PNP16 
(SPST- 
NO × 16)		12 VDCG7TC-OC16-1 DC12
24 VDCG7TC-OC16-1 DC24
High- 
capacity 
socket/ 
G70A *1 
(Socket 
only)		In- 
puts		Relay 
inputs		NPN/ 
PNP		16 
(SPDT 
× 16 
possible 
with G2R 
Relays)		100 mA110 VDC 
max., 
240 VAC 
max. *2		G70A-ZOC16-5U, C, 
CE 
(VDE 
certi- 
fied)
Out- 
puts		Relay 
outputs		NPN10 A 
(Terminal 
block 
allowable		24 VDCG70A-ZOC16-3
PNPG70A-ZOC16-4
Space- 
saving/ 
Vertical 
type 
G70D-V		Out- 
puts		Relay 
outputs		NPN16 
(SPST- 
NO × 16)		5 A or 
3 A *3		24 VDCG70D-VSOC16U, C, 
CE 
(VDE 
certi- 
fied)
MOSFET 
relay 
outputs		0.3 AG70D-VFOM16
Space- 
saving/ 
Flat type 
G70D		Relay 
outputs		NPN8 
(SPST- 
NO × 8)		5 AG70D-SOC08-
16 
(SPST- 
NO × 16)		3 AG70D-SOC16
PNP16 
(SPST- 
NO × 16)		3 AG70D-SOC16-1
MOSFET 
relay 
outputs		NPN16 
(SPST- 
NO × 16)		0.3 AG70D-FOM16
PNPG70D-FOM16-1
High- 
capacity, 
space- 
saving/ 
G70R		Out- 
puts		Relay 
outputs		NPN8 
(SPST- 
NO × 8)		10 A24 VDCG70R-SOC08-

 

 

 

*1. G70A is a I/O terminal socket product. Relay is not provided with the socket. Be sure to order a relay, timer separately. 
*2. Each relay to be mounted must incorporate a coil that has proper specifications within the maximum rated voltage range. 
*3. Eight or fewer points ON: 5 A, Nine or more points ON: 3 A. 
*4. Internal common at terminal block: No internal connections 
*5. Internal common at terminal block: Internal IO common 16 points internally connected 
*6. Internal common at terminal block: Every 4 points internally connected at terminal block middle row. 
Note: 1. For the combination of Input Units with I/O Relay Terminal and Connecting Cables, refer to 3. Connecting I/O Relay 
              Terminals. 
          2. Please refer to each Datasheet about details. 
          3. When the G7TC is used with an AC rated voltage, three rated currents can be used. If a coil voltage of 110 or 220 
               VAC is used, 50 Hz cannot be used.

 

 

Cables for I/O Relay Terminals

 

 

TypeNameI/O 
Classifi- 
cation		AppearanceCable length 
L (mm)		Models
Fujitsu 
connectors 
(24 pins)		Cables with 
Connectors 
(1:1) 
XW2Z-R[]C		16 I/O 
points		2054_lu_7_11,000XW2Z-R100C
1,500XW2Z-R150C
2,000XW2Z-R200C
3,000XW2Z-R300C
5,000XW2Z-R500C
Fujitsu 
connectors 
(40 pins)		Cables with 
Connectors 
(1:2) 
XW2Z-RI[]C-[]  
XW2Z-RO[]C-[]		32 input 
points		2054_lu_7_2(A) 1,000 
(B) 750		XW2Z-RI100C-75
(A) 1,500 
(B) 1,250		XW2Z-RI150C-125
(A) 2,000 
(B) 1,750		XW2Z-RI200C-175
(A) 3,000 
(B) 2,750		XW2Z-RI300C-275
(A) 5,000 
(B) 4,750		XW2Z-RI500C-475
32 output 
points		(A) 1,000 
(B) 750		XW2Z-RO100C-75
(A) 1,500 
(B) 1,250		XW2Z-RO150C-125
(A) 2,000 
(B) 1,750		XW2Z-RO200C-175
(A) 3,000 
(B) 2,750		XW2Z-RO300C-275
(A) 5,000 
(B) 4,750		XW2Z-RO500C-475
MIL 
connectors 
(20 pins)		Cables with 
Connectors 
(1:1) 
XW2Z-RI[]C 
XW2Z-RO[]C		16 I/O 
points		2054_lu_7_3250XW2Z-RI25C
500XW2Z-RI50C
250XW2Z-RO25C
500XW2Z-RO50C
MIL 
connectors 
(40 pins)		Cables with 
Connectors 
(1:2) 
XW2Z-RO[]-[]-D1, 
XW2Z-RI[]-[]-D1		32 I/O 
points		2054_lu_7_4(A) 500 
(B) 250		XW2Z-RO50-25-D1
(A) 750 
(B) 500		XW2Z-RO75-50-D1
(A) 1,000 
(B) 750		XW2Z-RO100-75-D1
(A) 1,500 
(B) 1,250		XW2Z-RO150-125-D1
(A) 2,000 
(B) 1,750		XW2Z-RO200-175-D1
(A) 3,000 
(B) 2,750		XW2Z-RO300-275-D1
(A) 5,000 
(B) 4,750		XW2Z-RO500-475-D1
(A) 500 
(B) 250		XW2Z-RI50-25-D1
(A) 750 
(B) 500		XW2Z-RI75-50-D1
(A) 1,000 
(B) 750		XW2Z-RI100-75-D1
(A) 1,500 
(B) 1,250		XW2Z-RI150-125-D1
(A) 2,000 
(B) 1,750		XW2Z-RI200-175-D1
(A) 3,000 
(B) 2,750		XW2Z-RI300-275-D1
(A) 5,000 
(B) 4,750		XW2Z-RI500-475-D1


New products

» Do not allow new products at this time.